Request a Quote
Published · 9 November 2026

PU stretcher cover manufacturer: fit, fluid barrier and cleaning

What to check with a PU stretcher cover manufacturer: the fabric, how the cover fits your stretcher, the fluid barrier, cleaning and custom sizes.

Paramedics taking a stretcher with a covered mattress out of an ambulance

A good PU stretcher cover manufacturer makes the cover to the exact shape of your stretcher mattress, uses a coated fabric that keeps blood and other fluids out of the foam, and tells you clearly how the cover is cleaned between patients. For ambulance services, hospitals and distributors, fit, barrier and cleaning decide how long a stretcher cover stays in service.

Why does a stretcher need its own cover?

A stretcher mattress has a harder life than a ward mattress. It is loaded in and out of vehicles, wheeled through corridors, and a new patient lies on it several times a day, often with bleeding wounds, infusions running or incontinence. The cover is the only thing between those fluids and a foam core that cannot be cleaned once it is soaked.

A stretcher cover also has to stay put. If it slides or bunches while the patient is moved, it wears quickly and leaves gaps where fluid can run in.

What should the fabric be?

Our stretcher covers use the same construction as our hospital mattress covers: a polyurethane (PU) coating on a high-elasticity polyester knit. When you compare suppliers, ask for these points in writing:

  • Coating and base fabric: PU on a knitted polyester base, with two-way stretch so the cover follows the mattress.
  • Fabric weight: we work with fabrics of 120 to 300 g/m² or more, depending on how hard the cover will be used.
  • Barrier: the coating should keep out blood, infusion fluids and urine.
  • Breathability: a vapour-permeable coating lets moisture escape, which matters on longer transfers and on stretchers used as trolleys in emergency departments.
  • Other properties: our fabric is antibacterial, anti-fungal, dust-resistant, flame-retardant and antistatic.

If a supplier quotes test values, ask which method was used and for the report. Our article on PU or PVC covers explains why we use PU rather than PVC for this kind of product.

How do you get a cover that really fits?

Stretcher mattresses are not standard. Lengths and widths differ between models, many have rounded or tapered ends, and some have cut-outs for straps, rails or the frame. A cover made from a generic size will either be loose or strain at the corners.

When you ask for a quote, send:

  1. The length, width and thickness of the stretcher mattress.
  2. The shape of the ends (square, rounded or tapered) and any cut-outs, with their position.
  3. The stretcher model, if you have it, and a photo or drawing.
  4. The quantity per size.

We cut each cover to that pattern. Ask for a sample before the full order, so you can check the fit on your own stretcher rather than on a drawing.

Stitched or welded seams?

Seams are where a coated cover is most likely to let fluid through. A stitched seam is pierced by the needle; a welded seam is fused by high-frequency or ultrasonic welding and has no needle holes. We make welded PU covers for stretchers as well as for beds, so you can choose the construction that suits your cleaning routine. Our guide to stitched and welded seams compares the two.

How is a stretcher cover cleaned?

Between patients the cover is wiped clean and disinfected on the stretcher. For a full clean it is taken off and machine washed. Follow the care label of the specific model, and tell your supplier which disinfectants and wash temperatures you actually use so the construction can be matched to them.

Questions to ask a stretcher cover manufacturer

  • What is the fabric, and what is its weight?
  • Can you make the cover to my stretcher's shape, including cut-outs?
  • Are the seams stitched or welded?
  • How is the cover cleaned, and is there a care label?
  • Can I see a sample on my own stretcher first?
  • Which quality system does the factory work under?

Libacce PU stretcher covers

Libacce makes PU stretcher covers in Istanbul from PU-coated, two-way-stretch polyester knit, cut to the dimensions of your stretcher mattress. They wipe clean between patients and can be removed and machine washed. Our production is certified to ISO 13485:2016 and ISO 9001:2015; the certificates are on our quality page.

We also produce under your own brand for distributors. Send us your stretcher dimensions, the shape of the ends and the quantities through the quote form.

All articles

Have a project in mind?

Send us your specification

Share the dimensions, the quantity and where it will be used. We come back with the right construction and a price.